iRocket LocSpoof (Windows version) & （Mac version） now supports Android devices, with gaming mode and social mode. Here's the guide for Android users.

 

Part 1. Get Started

Step 1: Launch iRocket LocSpoof

Install and launch iRocket LocSpoof, and click on Get Started.

Step 2: Connect Your Device

You can choose USB connection or Wifi connection.

USB connection: Connect your Android device to the computer via a USB data cable to select the USB connection.

WiFi connection: Make sure the Android device and computer are connected to the same WiFi network, then you can choose WiFi connection.

Step 3: Open USB Debugging

After choosing the device, please open USB debugging according to the guide in the program.

Ensure that the mobile phone's USB connection mode is Media Transfer Protocol (for LG mobile phones, it should be set as Picture Transfer Protocol). The steps to set USB connection mode maybe different among different phone brands. Generally speaking, you can fall out of the notification bar, and then find the USB connection mode option.

Step 4: Follow the Guide in the Program

Tap 7 times Build Number (or "System versions") to open the developer mode, and then enter Developer option, find and open USB debugging (Some Android phones will also need to turn on "Allow to install apps via USB").

Step 5: Allow USB Debugging

Confirm Allow USB debugging on your mobile phone.

If the popup is not shown on your device, click Show Again and you can see it.

Step 6: Select the Mode

After success, you will enter the mode selection interface, and choose you want to use.

Gaming Mode

Note: Gaming Mode can only support Pokémon GO game accessories.

Step 1: Check the Disclaimer

Check the disclaimer, and then click Gaming Mode entrance into the gaming mode.

Note: Gaming mode is not always available. When the server is being maintained or updated, users will see a text prompt, and unable to enter Gaming mode. In this case, please wait for a few minutes to several hours, to see it again.

Step 2: Select the Mode

Then the program will start the loading process and provide the progress bar. At this time, please wait for a moment. Some mobile phones need to confirm and give some permissions, so please keep a close watch on your mobile phone.

Step 3: You're All Set!

After the loading is completed, if you see a popup You're All Set! , you may need to login to your game account on your phone. Generally, the popup only appears when you start the game for the first time. And it will disappear automatically when you sign in with your account and enter the map.

Tips

Social Mode

Note: Social Mode can work with most location-based apps, such as Google Map, Facebook, WhatsApp, etc.

Step 1: Select the Mode

Click Social Mode entrance into the social mode.

Step 2: Install LocSpoof Assistant

Wait a moment, the program will installed LocSpoof Assistant on your mobile phones. (LocSpoof Assistant will not appear on the mobile phone under Android 10. It doesn't need to manually start or operate at any time. Just keep on the phone.)

After the installation is completed, find Select mock location app in Developer Options, and select LocSpoof Assistan.

Step 3: Start to Move

Then you're good to go! For your convenience, please keep these permission Settings for next time.

 

Part 2: Teleport Location

Step 1: Select a Destination on the Map

Choose Teleport Mode at the upper right corner. Now you can zoom in and out the map by scrolling the mouse, and select a destination. Or you can enter the address/GPS coordinates at the upper left corner to search your destination, for example, Vancouver.

Step 2: Change GPS Location with 1-Click

As you select a destination, the sidebar will pop up. It shows you the destination information including the place name, coordinates, and the distance. Click Move.

Your location will be changed to Vancouver immediately. The all location-based applications on your Android devices will be changed to Vancouver as well.

 

Part 3: Draw Routes to Move

Mode 1: Choose Jump Teleport Mode

Step 1: Choose Jump Teleport Mode. If you want to customize the jumping teleport route, you can select Jump Teleport Mode.

Step 2: Plan Your Jump Teleport Route

Select different jumping teleport spots one by one on the map that you want to pass by. Or enter address/GPS coordinates to set the spots.

After selecting a route, click Move to jump to the next point, and you can switch between the previous point and the next point at will.

If you want to end the route, skip to the last point and click End.

Also, you can tick Auto-jump after cooldown before starting the route, and the checked route will automatically jump to the next point based on the cooldown timer until the route is completed.

As it moves on the map, the GPS on your Android devices moves without lag. After completion, there will be a sound and a prompt pop-up window will pop up.

 

Mode 2: Two Spots Mode

Step 1: Choose Two-spot Mode. If you want to customize a route, you can select Two-spot Mode at the upper right corner.

Step 2: Plan Two-spot Route

Pinpoint a location on the map as your destination. You can also choose a destination by entering the address or coordinate in the Search box. The chosen destination will be added in the sidebar. You can see the place names and the coordinates of your current location and the destination.

You can now set up the number of times for the virtual route to move back and forth between the two places. Drag the Speed bar to customize your moving speed.

When it is all set up, click Move to start simulating the movement. You can see the distance and time change as it moves.

As it moves on the map, the GPS on your Android devices moves without lag. After completion, there will be a sound and a prompt pop-up window will pop up.

 

Mode 3: Multi-Spots Mode

Step 1: Choose Multi-spot Mode. If you want to plan a route with multiple spots, you can select Multi-spot Mode at the upper right corner.

Step 2: Plan Your Multi-spot Route

Select different spots one by one on the map that you want to pass by. Or enter address/GPS coordinates to set the spots.

Set the number of round trip times by entering the number. And set the speed by dragging the Speed bar. After the Times and Speed are set up, click Move to start the journey.

As it moves on the map, the GPS on your Android devices moves without lag. After completion, there will be a sound and a prompt pop-up window will pop up.

 

Part 4: Use GPS Joystick

Step 1: Choose Joystick Mode

If you want to mock your GPS location with joystick, you can select Joystick Mode at the upper right corner. One click to Move automatically.

Step 2: Set the Direction

Set 360-degree directions. Move forward or reverse by clicking the Direction button. You can change the directions in real-time marching. Or you can use keys W, A,S, D, or keys Up, Down, Left, Right to control GPS spot movement.

 

Part 5: Special Features of iRocket LocSpoof

Feature 1: Circle Route

Under Multi-spot mode, when the starting point and the end point are nearby, the program will automatically ask if you need to create a circle route. Click Yes, it will align the starting point and the end point; click No, the end point will keep the exact coordinates.

Feature 2: Realistic Mode

Check Realistic Mode, and then moving speed will randomly vary in the upper or lower 30% of selected speed range. The speed varies every 5 seconds.

Feature 3: Returns or Loops

When the times are greater than 1, the user can choose to return original road (from start to finish, and then return), or loop (from start to finish, from start to finish again) in the form of a repeat this route.

Feature 4: Collect Spots and Routes

When using Teleport Mode and searching for a new spot, you can click on the Star icon to collect this spot. Turn on the Star button in the lower right corner to display your favorite spots on the map.

When creating a multi-spot route or two-spot route, you can also click on the Star icon to collect this route.

The collected spots and routes will be shown in the Saved Spots and Saved Routes panel.

Tap the Top icon to the left of the Star icon to place your favorites at the top.

Feature 5: Support 10 Android Devices

iRocket LocSpoof supports changing GPS location of 10 different Android devices at the same time.

Click on the panel icon on the right and it will show the connected device. Then click the Plus sign in the upper right corner.

Choose the Android device that you want to change GPS location at the same time.

After trusting the computer, you can see all devices in the device panel, click the switch button for Controling/uncontroling any device at any time, or click the X button to disconnect any device individually. Or you can directly Disconnect All to return to the Home page.

Feature 5: Import/Export GPX File

iRocket LocSpoof can import/export GPX file of single and multiple paths to save your favorite routes now.

Click on the Import icon on the right, and you can import the GPX file.

Click on the Exprt icon on the left route panel, and you can export the GPX file.

Feature 6: Fluctuation Mode

In the teleport mode, you can check the wave mode. After checking, the virtual positioning point will fluctuate back and forth within a few meters of the center of the selected position.

Feature 7: Cooling Timer Function

When you want to use the Teleport Mode or Jump Teleport Mode to modify the position with one key, you can turn on the cooling button in the lower right corner of the product interface, and the cooling timer will appear at this time.

When you select the desired location and click to move, the timer will calculate the corresponding cooling time according to the distance. It is recommended that you do not perform other actions until the countdown is over to avoid being under house arrest by the game.

In addition, the jump teleportation mode can choose to automatically jump after cooling down.

When you finish selecting points and choose to automatically jump after cooling down, click the move button, and it will automatically jump to the next point according to the cooling down countdown time until the route is completed.

Click Reset, the countdown will be cleared, and the countdown will recalculate the time when you modify the positioning next time.

When you don't want to use the cooldown timer, tap the Cooldown button again to turn it off.

Feature 8: Map Collection - PokéStop & Gym

Added PokéStop & Gym feature in History & Favorites for PokémonGo users. You can choose your favorite region and click to go to the region.

You can see all PokéStops and Gyms in the area in the area. You can simulate movement or modify the virtual location to collect items at PokéStops or fight at Gym according to your needs.

If this feature is not useful to you, you can click the close button and the icon will not be displayed on the map. If you like a certain region, you can click Like.